Abrasive Wheels (PUWER) Regulations - Theory and Practical

Abrasive Wheels (PUWER) Regulations - Theory and Practical

The risk of breakage is inherent in every abrasive wheel. If the number of breakages, and therefore accidents, is to be kept low, the initial care exercised in the design, manufacture and testing by machine makers must be combined with the adoption of safety measures by the users.  Accident statistics indicate that nearly half of all accidents involving abrasive wheels occur because of an unsafe system of work or operator error.  With regards to abrasive wheels, PUWER 98 (The Provision and Use of Work Equipment Regulations 1998) requires, among other things, that all machinery is suitable for its intended use and is properly maintained. All employees, including those using, mounting and managing the operation of abrasive wheels, should be fully informed and properly trained in their safe use.  This is a one day course for Theory and Practical for anyone involved in the use of Abrasive Wheels

Enquire Now
Aim

To assist delegates, involved with using, mounting or supervising the use of Abrasive Wheels

Benefits
  • Have an understanding of legal requirements placed on their organisation
  • Appreciate their legal responsibilities when involved with Abrasive Wheels
  • Apply procedure in accordance with good practice
  • Reduce incidents involved with Abrasive Wheels
Programme
  • Hazards with Abrasive Wheels
    • Wheel Breakages
    • Incorrect Use, Loading & Mounting of Grinding Machinery
  • Marking of Abrasive Wheels and Storage
    • Methods of Marking Abrasive Wheels
    • Identification of Maximum Operating Speeds
    • Identification and Composition of Abrasive Wheels
    • Methods to be applied for Storage on various types and shapes of Abrasive Wheels
    • Environmental Factors affecting Storage of Abrasive Wheels
    • Handling and Transporting Abrasive Wheels
      • Inspection and Testing of Abrasive Wheels
        • Techniques for identifying cracks & damage to Abrasive Wheels
        • Selection of correct wheel type for operation required
      • Mounting of Abrasive Wheels
        • Preparing the Machine and Work Area
        • Inspection of Machine Controls & Guards
        • Various Mounting Techniques for Abrasive Wheels
        • Adjustment of Guards and Work Rests
        • Methods of Dressing Abrasive Wheels
        • Use of Extractors and Coolants
        • Reinstating Work Area after Mounting
Approach

This programme uses a mixture of group discussions, pro-forma examples, information input sessions along with practical application to fully involve participants.

Marches Local Enterprise Partnership
Growth Deals
European Union Regional Development Fund
Midlands Engine